Manual Channel Tuning - RCA 20V500T User Manual

Rca 20v500t: users guide

Hide thumbs Also See for 20V500T:

Specification sheet (2 pages)

Table Of Contents

Table of Contents

Manual Channel Tuning allows you to search for channels

that may have been missed during the Auto Search. For

example, if you are looking for a channel between 60 and

70, start the search at channel 60 and go up.

Press MENU to see the main menu.

Press CH+ or CH- to highlight Setup.

Press OK to enter the Setup submenu.

TV/CATV is highlighted. Press VOL+ or VOL- to select

TV or CATV (whichever you have). Details are on page

11.

Press CH+ or CH- repeatedly to highlight Channel.

Press VOL+ or VOL- to enter the channel number at

which you want to begin the search.

Press CH+ or CH- repeatedly to select Manual.

Press VOL+ to start searching upward (for example,

starting at channel 60 and going up to 61, 62, 63,

etc.). Press VOL- when you find the channel you

want. This stops the search. Otherwise the search will

stop at the first available channel.

Or, press VOL- to start searching downward (for

example, starting at channel 60 and going down to

59, 58, 57, etc.). Press VOL+ when you find the

channel you want. This stops the search. Otherwise

the search will stop at the first available channel.

Press MENU repeatedly to exit the menu or the menu

will automatically disappear within a few seconds if

no buttons are pressed on the remote control.

Model 20V500T: If you have this model you will not

see the Sound menu option and your remote will not

have MTS or SOUND buttons.

Helpful Hint

You cannot select the Setup

menu if the TV is set to a video

input channel (FRNT). Press

INPUT repeatedly to get to

regular TV programming.