On-Timer - RCA 20V500T User Manual

To turn on the TV to a specific channel at a specific time, use
the On-Timer. Before you begin, set the clock correctly.
Details are on page 18.
1
Press MENU to see the main menu.
2
Press CH+ or CH- to highlight Time.
3
Press OK to enter the Time submenu.
4
Press CH+ or CH- repeatedly to highlight TV/CATV.
5
Press VOL+ or VOL- to select TV or CATV, depending
on whether you have Cable TV service or not. Details
are on page 11.
6
Press CH+ or CH- repeatedly to highlight Channel.
7
Press VOL+ or VOL- to enter the channel number.
This will be the channel to which the TV turns on at
the specified time.
8
Press CH+ or CH- repeatedly to highlight On Time.
9
Press VOL+ or VOL- to select Once, Daily or Off.
If you select Once, the timer will turn on the TV one
time within the next 24 hours only.
If you select Daily, the timer will turn on the TV at the
same time and to the same channel every day.
Choose Off to cancel the On-timer.
10
Press CH+ or CH- repeatedly to highlight 0:00 under
the line of On Time.
11
Press VOL+ or VOL- to enter the on time. Hold down
VOL+ or VOL- to change the time quickly in 10
minute increments; press OK. The hour is highlighted.
Use VOL+ or VOL- to set the hour. This will be the
time at which the TV will turn itself on.
12
Press MENU repeatedly to exit the menu or the
menu will automatically disappear within a few
seconds if no buttons are pressed on the remote
control.
Model 20V500T: If you have this model you will not
see the Sound menu option and your remote will not
have MTS or SOUND buttons.

On-Timer

Main Menu
Picture
Sound
Preferences
Time
Setup
19
Main Menu
Picture
Sound
Preferences
Time
Setup
Time
Off Time Off
AM12:00
On Time Off
AM12:00
Channel 1
TV/CATV CATV
Clock AM10:00
Time
Off Time Off
AM12:00
On Time Off
AM12:00
Channel 1
TV/CATV CATV
Clock AM10:00
Time
Off Time Off
AM12:00
On Time Once
AM12:00
Channel 1
TV/CATV CATV
Clock AM10:00
Time
Off Time Off
AM12:00
On Time Once
AM11:30
Channel 1
TV/CATV CATV
Clock AM10:00