Weights And Dimensions; Rear Panels - HP Enterprise R1500 G4 UPS User Manual

1. Overview

1.2 Weights and dimensions

Description
HPE R1500 G4 NA
HPE R1500 G4 JP/TWN
UPS
HPE R1500 G4 INTL UPS

1.3 Rear panels

HPE R1500 G4 NA UPS and HPE R1500 G4 JP/TWN UPS
3 8
HPE R1500 G4 INTL UPS
3
Note: The R/T1500 G4 has 3 programmable output load segments. These
are defined as Group 1, Group 2, and Primary Group. The load segments/
groups can be configured via software and the unit's user interface. See
the HPEPP software or the UPS Management Card documentation for
advice on configuration via software; see the User Interface section of this
guide for advice on configuration via the front panel. Load Groups 1 and
2 can be programmed to switch off/on independently. The Primary Load
Group controls the outlets indicated and will initiate a unit shutdown. The
Primary Load Group is intended for the most critical loads.
Page 6
D
W
Weights Dimensions (mm/inch)
(kg/lb.) D x W x H
20 kg/44 lb. 554 x 437 x 43 mm/21.8 x 17.2 x 1.7 in.
20 kg/44 lb. 554 x 437 x 43 mm/21.8 x 17.2 x 1.7 in.
19.5 kg/43 lb. 554 x 437 x 43 mm/21.8 x 17.2 x 1.7 in.
7 2 1 4 9 5
7 2 1 4 8
H
(1)
(2)
6a 6b
(3)
tion card
(4)
(5)
(6a) Group 1: programmable outlets
(6b) Group 2: programmable outlets
(7)
(8)
(9)
(1)
5 6a
6b
(2)
(3)
card
(4)
(5)
(6a) Group 1: programmable outlets
(6b) Group 2: programmable outlets
(7)
(8)
USB communication port
RS-232 communication port
Slot for optional communica-
Connector for ROO (Remote
On/Off) or RPO (Remote Power
Off)) control
Outlets for connection of critical
equipment (Primary group)
for equipment connection
for equipment connection
Attached 6 ft. input power cord
for AC power source
LED indicating site wiring fault
alarm
Ground screw
USB communication port
RS-232 communication port
Slot for optional communication
Connector for ROO (Remote On/
Off) or RPO (Remote Power Off)
control
Outlets for connection
equipment (Primary group)
for equipment connection
for equipment connection
Socket for connection to AC
power source
Ground screw
792518-001 Edition 2