Clover CDR1660 Manual page 58

MODEL: CDR1660 / CDR0860 / CDR0460
d) BAUD RATE
You have to select the appropriate communication speed. Available speeds are from 1200 to
57600.
e) ID
You have to select and match the PTZ camera address. For example, if the PTZ camera is set to
address 2, then the ID should be set to 2.
H.264 STAND-ALONE DVR USER MANUAL V 2.6
Click the PTZ button of the channel where the PTZ
camera is connected and select the appropriate
protocol type. Or in case of using the remote controller
or the front panel buttons, highlight the PTZ button of
the channel where the PTZ camera is connected and
press the ENTER button and then highlight the
desired value and press the ENTER button.
default is NONE.
Click the BAUD RATE button of the channel where the
PTZ camera is
communication speed. Or in case of using the remote
controller or the front panel buttons, highlight the
BAUD RATE button of the channel where the PTZ
camera is connected and press the ENTER button
and then highlight the desired value and press the
ENTER button.
The default is 9600.
Click the ID button of the channel where the PTZ
camera is connected and click the matching PTZ
camera address and then click the ENTER (
button. Or in case of using the remote controller or the
front panel buttons, highlight the ID button of the
channel where the PTZ camera is connected and
press the ENTER button and then move the cursor
using the ▲,▼
,◀, ▶
button. Press the ESC button to save and exit the
changed value.
The default is 1.
58
connected and select
buttons and press the ENTER
The
the
)