Dvd Player + Tv + Audio/Video Receiver - RCA RC5500P User Manual

DVD Player + TV + Audio/Video Receiver

DVD Player + TV + Audio/Video Receiver
(Best Picture and Sound Quality)
TV
AUDIO VIDEO
L R
AUDIO OUT
SURROUND
CENTER REAR FRONT
DIGITAL
DVD
L L
PLAYER
AC-3
OR
PCM
R R
SUB- REAR FRONT
WOOFER
DVD
L
5.1
R
CENTER
L
L-SUR
R
REAR
R-SUR
L
SUB
R
WOOFER
AUDIO
AUDIO/VIDEO
RECEIVER
To Connect the DVD Player
1. If you have a Dolby Pro Logic Surround receiver, use audio/
video cables to connect the AUDIO OUT SURROUND FRONT
L and R, CENTER, REAR L and R, and SUBWOOFER jacks to
the corresponding jacks on the receiver.
If your receiver only has right and left AUDIO IN jacks,
connect it to the AUDIO OUT MIXED FRONT L and R
jacks.
2. Use a video cable to connect either VIDEO OUT jack to a TV
(or the S-video cable to connect the S-VIDEO OUT jack, if
your television has an S-Video input).
To Watch DVD
Tune your television to either the Video or S-Video input
channel. Use your audio/video receiver for audio.
14 Connections
S-VIDEO
OR
VIDEO OUT
MIXED
VIDEO
FRONT OUT
L 1
S VIDEO
OUT
R 2
FRONT
DVD5.1
VIDEO
IN OUT DVD/ MONITOR
VCR SAT
LD OUT
VCR DVD/ SAT
LD
IN OUT
AUDIO
1
AUDIO
2
IN OUT SUB WOOFER
TV CD TAPE/MD OUT (MONO)
ANT IN
CABLE
OR
OFF-AIR SIGNAL
R F A D A P TO R
R
If you have a Dolby Pro Logic Surround
decoder, you will obtain the full benefit
of Pro Logic from the same DVD movies
that provide full 5.1-channel Dolby
Digital soundtracks, as well as from
titles with the Dolby Surround mark.
CAUTION
Do not stack electronic components or
other objects on top of the DVD player.
See Safety Information, inside front
cover.
Consult the owner's manuals of the
additional components you are
connecting for more detailed
connection information for those
particular components.