Dvd Player + Tv Without A/V Input Jacks - RCA RC5500P User Manual

DVD Player + TV without A/V Input Jacks

DVD Player + TV without A/V Input Jacks
(Good Picture and Mono Sound Quality)
TV
DVD
PLAYER
OUT
AUDIO
SURROUND
CENTER REAR FRONT
DIGITAL
L L
AC-3
OR
PCM
R R
SUB- REAR FRONT
WOOFER
To Connect the DVD Player
If you do not have audio/video input jacks on your television,
you need to use an RF output adaptor.
1. Connect the RF output adaptor into the back of the player
as shown above.
2. Connect the off-air antenna or your cable signal to the
antenna input on the RF output adaptor.
3. Connect the output from the RF output adaptor to the
antenna input on your television.
To Watch DVD
Tune your television to the RF output adaptor's output channel
(the output adaptor should have a CH 3/4 switch to indicate
the output channel).
12 Connections
VIDEO OUT
MIXED
VIDEO
FRONT OUT
L 1
S VIDEO
OUT
R 2
FRONT
ANT IN
CABLE
OR
OFF-AIR SIGNAL
RF
OUTPUT
ADAPTOR
R F A D A P TO R
CAUTION
Do not stack electronic components or
other objects on top of the DVD player.
See Safety Information, inside front
cover.
Consult the owner's manuals of the
additional components you are
connecting for more detailed
connection information for those
particular components.