Table of Contents
Advertisement
Chapter 1
TV
S-VIDEO
2B
DVD
PLAYER
DVD Player + TV with Audio/Video Input Jacks
1.
Connect the audio cables to the AUDIO OUT L (left – white) and R (right – red) jacks on the back of
your DVD Player, and to the corresponding Audio Input jacks on your TV.
2.
Connect the video cable.
A. Basic video connection – Connect the video cable (yellow) to the VIDEO OUT jack on the back of
your DVD Player, and to the Video Input jack on your TV.
B. S-Video – (optional) If your TV has an S-Video Input jack, connect the S-Video cable to the S-
VIDEO OUT jack on the back of your DVD Player and to the S-Video jack on your TV. If your TV
doesn't have S-Video, use the basic video connection listed above.
C. Component video (optional, not shown in illustration) – If your TV has component video (Y, P
P
jacks) use video-grade cables for the Y, P
R
color-coded connectors with a compatible TV. If your TV doesn't have component video, use the basic
video connection or the S-Video connection listed above.
3. Plug in the AC power cord into an AC outlet.
Note: Your cable or off-air connection to the television should not be affected by this connection.
Connect your cable or off-air antenna to your television as you normally would. You may need to
consult your television manual for details.
Connections & Setup
AUDIO OUT
R
L
AUDIO IN
VIDEO IN
R
L
2A
OPTICAL
COAXIAL
1
2
L
R
DIGITAL OUT
AUDIO OUT
OR
OR
, and P
B
ANT IN
1
VIDEO
OUT
Pr
VIDEO
COMPONENT
COMPONENT
VIDEO OUT
VIDEO OUT
Pb
Y
S-VIDEO
connections. Note that it is essential to match the
R
CABLE
OR
OFF-AIR
SIGNAL
3
, and
B
Go to page 20
9
Advertisement
Table of Contents
