The Handset Layout; The Base Unit Layout - AT&T E2116 User Manual

Parts Check List
1. Base Unit
2. Handset
3. Base Power Adaptor
4. Telephone Line Cord
5. Battery
6. Belt Clip
7. User's Manual
8. Wall Mount Bracket
To purchase replacement batteries, visit us on the web at www.telephones.att.com or call
Advanced American Telephones at 1-800-222-3111.

The Handset Layout

1. Antenna
2. Earpiece
3. LCD
4. Left and Right Arrow Keys
5. Phone/Flash Key
6. Dialing Keys (0-9,*,#)
7. Chan/Delete Key
8. Microphone
9. Headset Jack
10. Select Key
11. Off Key
12. Hold Key
13. Redial/Pause Key
14. Prog Key

The Base Unit Layout

1. Message Light
2. Locate Handset Key
3. Charging/In use Light
4. Telephone Line Jack
5. DC Connector Jack
Setup
Connecting Power to Base Unit
1. Choose a location for the base near an electrical outlet and a telephone jack. This phone
requires a modular telephone jack and a standard electrical outlet (110V AC) not controlled by a
wall switch.
2. Plug the DC connector to the base. Plug the AC adaptor into an electrical outlet.
Installation and Charge of Battery
1. Install the battery. Use only AT&T batteries.
a) Remove battery compartment cover by pressing on the indentation and sliding downward.
b) Align the two holes in the plug with the socket pins, then snap the plug into place.
c) Place the battery in the compartment with the wires in the lower right corner.
d) Replace the battery compartment cover.