Setting and Using the Water Heater
(Main Controller)
DANGER
Hot Water Heater temperatures over 50°C can cause
severe burns instantly or death from scalding.
•
Children, disabled and elderly are at the highest risk of being scalded.
Feel water temperature before bathing or showering.
Temperature limiting valves are available, ask licensed installer.
• When setting the unit to 60°C (
display will flash for 10 seconds and emit a tone as a high
temperature warning.
• Take caution when using the unit again after setting to 50°C
or higher. Always check the set temperature before use.
16
Operating Instructions
2
1
To prevent scalding:
High Temperature
p.17), the temperature
(Starting with the Operation Off)
1
Press the Operation
Button.
The temperature will be
displayed on the remote
control thermostat.
On
Previous set temperature
(Eg.: 40°C)
Remote Controller Display
Flashes for 10 sec
On