Setting And Using The Water Heater - Bosch BC2600RA Owner's Manual

Setting and Using the Water Heater

(Main Controller)
Main Controller
Bath Fill
Priority Burner on
Temp.
Set Time
Press 2sec.
to set time
YPRM67XB
DANGER
Hot Water Heater temperatures over 50°C can cause
severe burns instantly or death from scalding.
•
Children, disabled and elderly are at the highest risk of being scalded.
Feel water temperature before bathing or showering.
Temperature limiting valves are available, ask licensed installer.
• When setting the unit to 60°C or higher (
temperature display will flash for 10 seconds and emit a tone
as a high temperature warning.
• Take caution when using the unit again after setting to 50°C
or higher. Always check the set temperature before use.
16
Operating Instructions
ON/OFF
Volume
Bath Fill
setting
High Temperature
2
1
To prevent scalding:
p.17), the
(Starting with the Operation Off)
1
Press the Operation
Button.
The temperature will be
displayed on the remote
control thermostat.
On
Bath Fill
Priority Burner on
Temp.
Previous set temperature
(Eg.: 40°C)
Remote Controller Display
Bath Fill
Priority Burner on
Temp.
Flashes for 10 sec
On