Sub Controller (YPRP62XBN) <Optional>
What is actually displayed depends on how the water heater is set.
Display
* Before use, remove the protective sheet from the remote controller surface.
The illustration below shows the remote controller display.
What is actually displayed depends on how the water heater is set.
Priority Indicator
When this indicator is lit,
the hot water temperature
can be set.
Burner On Indicator
When burning, the
indicator is lit.
12
Operating Instructions
(
p.18)
(
p.17, 21)
Display
Operation Button
For turning the water
heater on or off.
Setting Buttons
For setting the hot
Water temperature.
(
p.16 -17)
Temperature setting
(Eg.: 40°C)
Error Code
A number will flash if
a failure occurs.
(
p.29)