Setting And Using The Water Heater - Bosch YS2180RA Owner's Manual

Hide thumbs Also See for YS2180RA:
Table of Contents

Advertisement

Setting and Using the Water Heater

(Main Controller)
DANGER
Hot Water Heater temperatures over 50°C can cause
severe burns instantly or death from scalding.
Children, disabled and elderly are at the highest risk of being scalded.
Feel water temperature before bathing or showering.
Temperature limiting valves are available, ask licensed installer.
• When setting the unit to 60°C (
display will flash for 10 seconds.
• Take caution when using the unit again after setting to 50°C
or higher. Always check the set temperature before use.
14
Operating Instructions
2
1
To prevent scalding:
High Temperature
p.15), the temperature
(Starting with the Operation Off)
1
Press the Operation
Button.
The temperature will be
displayed on the remote
control thermostat.
On
Previous set temperature
(Eg.: 40°C)
Remote Controller Display
Flashes for 10 sec
On

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents