Table of Contents
Advertisement
6.3 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
/
/
As long as the indicator is
visible, there is a risk of burns from
residual heat.
The induction cooking zones produce the
heat necessary for the cooking process
directly in the bottom of the cookware. The
glass ceramic is heated by the heat of the
cookware.
The indicators appear when a cooking zone
is hot. They show the level of the residual
heat for the cooking zones you are currently
using:
- continue cooking,
- keep warm,
- residual heat.
The indicator may also appear:
• for the neighbouring cooking zones even if
you are not using them,
• when hot cookware is placed on cold
cooking zone,
• when the hob is deactivated but the
cooking zone is still hot.
The indicator disappears when the cooking
zone has cooled down.
6.4 The heat setting
Turn the knob for the heating functions to
select a heating function. To deactivate it turn
the knob to the off position
6.5 Automatic Switch Off
The function deactivates the hob
automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after you
activate the hob,
• you spill something or put something on
the control panel for more than 10
seconds (a pan, a cloth, etc.). An acoustic
signal sounds and the hob deactivates.
Remove the object or clean the control
panel.
• the hob gets too hot (e.g. when a
• you use incorrect cookware. The symbol
• you do not deactivate a cooking zone or
The relation between the heat setting and
the time after which the hob deactivates:
6.6 Automatic Heat Up
If you activate this function you can get a
necessary heat setting faster. The function
sets the highest heat setting for some time
and then decreases to the correct heat
setting.
To activate the function for a cooking
zone: turn the knob for a cooking zone to the
Immediately set the correct heat setting.
.
To deactivate the function: turn the knob to
the off position.
6.7 PowerBoost
This function makes more power available to
the induction cooking zones. The function can
be activated for the induction cooking zone
only for a limited period of time. After this time
the induction cooking zone automatically sets
back to the highest heat setting.
To activate the function for a cooking
zone: touch
saucepan boils dry). Let the cooking zone
cool down before you use the hob again.
comes on and the cooking zone
deactivates automatically after 2 minutes.
change the heat setting. After some time
comes on and the hob deactivates.
Heat setting
, 1 - 2
3 - 4
5
6 - 9
To activate the function a cooking zone
must be cold.
position.
shows on the display.
.
The hob deactivates
after
6 hours
5 hours
4 hours
1.5 hour
comes on.
ENGLISH
13
Advertisement
Table of Contents
