Table of Contents
Advertisement
3.
M.2 LEDs (M.2_1_LED; M.2_2_LED)
The M.2 LED near the M.2 socket will light up when an SATA SSD device is detected.
This motherboard supports PCIE SSD devices only.
4.
Q-Code LEDs
The Q-Code LED design provides you with a 2-digit error code that displays the system
status. Refer to the Q-Code table on the next page for details.
•
•
1-14
The Q-Code LEDs provide the most probable cause of an error code as a starting
point for troubleshooting. The actual cause may vary from case to case.
Please refer to the Q-Code table in the Appendix section for more details.
Chapter 1: Product Introduction
Advertisement
Table of Contents
