Installing Four Crossfirex™ Graphics Cards - Asus WS X299 SAGE/10G User Manual

5.1.5 Installing four CrossFireX™ graphics cards
To install four CrossFireX™ graphics cards:
1. Prepare four CrossFireX™-ready graphics cards.
2. Insert the four graphics cards into the PCIEX16 slots. Refer to Chapter 1 in this user
manual for the locations of the PCIEX16 slots recommended for multi-graphics card
installation.
3. Ensure that the cards are properly
seated on the slots.
4. Align and firmly insert the three
CrossFireX™ bridge connectors to
the goldfingers on each graphics card.
Ensure that the connectors are firmly
in place.
5. Connect four independent auxiliary
power sources from the power supply
to the four graphics cards separately.
6. Connect a VGA or a DVI cable to the
graphics card.
5-4 Chapter 5: Multiple GPU Support