Advertisement
6. Eliminate unwanted part of the inlet pipe according to the
marks of reserved space ,and rasp a smooth surface with
files.
7. Apply mild soap and water around the gasket. Position the
bowl over the floor fixings and connect the waste pipe.
8. Carefully thread the screws into the brackets, until toilet is
secure. Alternately tighten left and right sides to prevent
pulling the toilet off center.
1267055-T01-D
Reserved Space
Drainage Pipe
P-Trap
P
6.
Inlet Pipe
Fig.#6
6
7.
S-Trap
S
Fig.#7
7
8.
Fig.#8
8
-4-
Advertisement
