Table of Contents
Advertisement
e Using various functions during
projecting
D ZOOM (Digital Zoom) +/– key
Enlarges a portion of the image while
projecting.
1 Press the D ZOOM + key to display
the digital zoom icon on the projected
image.
2 Press the V/v/B/b keys to move the
digital zoom icon to the point on the
image you wish to enlarge.
3 Press the D ZOOM + key or the D
ZOOM – key repeatedly to change the
enlargement ratio. The image can be
enlarged up to 4 times.
Press the RESET key to restore the
previous image.
TWIN (Twin Picture) key
(VPL-FH500L only)
You can project the images from two
input signals on the screen as a main
picture and subpicture at the same time.
To switch between one and two pictures,
press the TWIN key on the Remote
Commander.
One picture display
Two pictures display
(A) Main picture (B) Subpicture
You can select the image to project to the
main picture.
The subpicture is preset to display the image
from INPUT B.
For details on combinations of input signals,
see "Combinations of Input Signals" on
page 55.
6
Location and Function of Controls
*1
TWIN key
Notes
• When displaying a two pictures, the ?
(On) key, 1 (standby) key, INPUT key,
and MUTING (PIC) key are available.
• When "Screen Aspect" (page 26) is set
to "4:3," the two picture function is not
available.
• When displaying a two pictures, the
input signal icon
the input select window (page 12).
• Picture settings set for one pictures may
not be reflected as two pictures.
MUTING key
PIC: Cuts off the image. Press again to
restore the image.
AUDIO: This function is not provided
in this projector.
VOLUME +/– key
This function is not provided in this
projector.
*2
FREEZE key
Pauses a projected image. Press again to
restore the image.
Notes
*1: Use this key when inputting a
computer signal. But it may not be
enabled, depending on the resolution
of the input signal and when
displaying a two pictures (VPL-
FH500L only).
*2: Use this key when inputting a
computer signal.
f Setting the energy–saving mode
easily
ECO MODE key
"Lamp Mode," "Power Saving Mode,"
and "Standby Mode" for energy-saving
can be set easily.
1 Press the ECO MODE key to display
the ECO Mode menu.
does not appear in
Advertisement
Table of Contents
