Question And Answer - Omron GentelTemp 510 Instruction Manual

13413 MC-510-E2 29-10-2008
GentleTemp 510 English
Did you forget to
attach the probe cover?
The measured result is Did you remove the
below 34°C (93.2°F). thermometer before
the measurement
was finished?
The measured result Is the infrared
exceeds 42.2°C (108.0°F). sensor broken?
Is the probe
cover broken?
The temperature of the You cannot measure
main unit may be below correctly when the
10°C (50°F). temperature of the
main unit is in these
ranges.
The temperature of the
main unit may be above
40°C (104°F).
12
zur Verfügung gestellt von Gebrauchs.info
13:22 Pagina 12
Attach the probe cover,
then measure.
Remove the thermo-
meter from the ear
after the measurement
is finished.
Return to the selling
point.
Replace the probe
cover with a new one.
Measure the temperature
after leaving the unit in
the room where you are
going to measure so
that the unit is accus-
tomed to the tempe-
rature of that room
(between 10°C - 40°C
(50°F - 104°F).
If you store the unit
in the room where you
are actually going to
measure, you can
measure quickly.
Aktualisierungsstand Gebrauchs.info November 2011
If the "Er.1" is
displayed again,
the unit may
be faulty.
This occurs when the device is moved from
one space to another and the difference in
temperature is more than 10°C. Wait for at
least five minutes until "AA" mark is not
displayed anymore.
Might be caused when the probe is grasped
for a long time or the thermometer is used
more than three times in a row.

5.2 Question and answer

How many times can I measure consecutively?
You can measure consecutively up to three times. The main unit will then
be warmed up and may not be able to measure correctly. If you are going to
measure more than three times, wait for ten minutes, then measure again.
The temperature indicated is rather high.
1 The probe cover may be faulty.
2 You may have used the thermometer that has been stored in a cool or
cold place. Measure the temperature after leaving the unit in the room
where you are going to use for more than thirty minutes. If you store the
unit in the room where you are going to measure the temperature, you
can use the thermometer promptly.
Wait for the unit to
turn off, then turn on
the unit again.