Polaris RANGER 570 2017 Owner's Manual For Maintenance And Safety page 26

FEATURES AND CONTROLS
Switches
Mode Button
The yellow button located near the instrument cluster is used to toggle through mode options
available. See pages 32-36.
Ignition Switch/Light Switch
Use the ignition switch to start the engine and to turn the
lights on or off. The key can be removed from the switch
when it is in the OFF position.
OFF
LIGHTS ON
POSITION
LIGHTS ON
START
High Beam Switch
The headlight high beam is controlled by the turn signal
lever. To switch the headlights to high beam, rotate the
lever downward. Rotate the lever upward to switch the
headlights to low beam.
Horn Switch
The horn switch is located on the turn signal lever. Press
the tip of the turn signal lever inward to sound the horn.
Hazard Switch
Push the hazard warning switch to cause all turn signal
lights to flash simultaneously. Both turn signal
indicators on the console will also flash. Use this feature
to alert others of an emergency or other situation
requiring caution.
24
Turn the key to the OFF position to stop
the engine. Electrical circuits are off.
All lights are on. Electrical circuits are
on. Electrical equipment can be used.
The headlights are off. Position lights
are on. Electrical equipment can be
used.
Turn the key to the START position to
engage the starter. See page 39 for
starting procedures.
Ignition Switch
Low
High
Beam
Beam
Horn
Switch
Hazard
Switch