QTek 8100 User Manual page 139

NOTE: If you want to change the default number, select the
desired Contact entry and press the Action button. Then
select the number you want to assign as the default, and
select Set as Default from the menu.
To call a contact using a number other than the default
number:
• Select the contact in the list, press the Left or Right
navigational buttons to display the abbreviation for the
number you want to use, then press the Talk button.
To find a contact by entering a name:
• Begin entering the name of the contact to find until the
name is displayed. For example, to find "Sandra," enter
7, 2, 6, 3, 7, 2 because these numbers correspond to the
letters for that name.
To filter contacts:
• Select Filter from the menu, then select the category
whose entries you want to display, such as Business,
Miscellaneous, or Personal. Only the contacts assigned
to the category you select are displayed in the list.
To create a new contact:
• When the Contacts list is displayed, press the Left Softkey
("New"), or select New Contact from the menu. After
entering the desired data, press Done.
To delete a contact:
• Select the desired entry in the Contacts list, then select
Delete from the menu.
To assign a Photo ID to a contact:
• Use the Photo Contacts (Caller ID) application. This was
explained earlier in Chapter 2.
Smartphone User Manual
139