Table of Contents
Advertisement
1886
Secure each blade to a blade iron as shown using the blade nuts, found in the
hardware bag, and the blade assembly screws, found in the
Repeat x6
IMPORTANT
NOTE: The blade arms should be mounted with
the ridge facing downward. Installing it incorrectly
could result in your fan not functioning.
7
Ceiling Bracket
Downrod
Installing the Canopy
Lift the canopy into place so that
the screw holes are aligned.
Installing the Blades:
hardware bag.
Hanging Fan
Wiring
Insert the two canopy screws
found in the
hardware bag.
Ridge
Canopy
Blades
x2
Canopy Screw
bag
x18
Blade Screw
bag
Blade Nut
bag
x12
Blade Arm Screw
bag
Lightly attach the blade arms to the motor with
screws found in the
hardware bag, then
securely tighten after both screws are attached.
Repeat x6
Light
LED/Glass
x18
Remote
Advertisement
Table of Contents
