Table of Contents
Advertisement
1886
4
Tighten the setscrew
with pliers. DO NOT
HAND TIGHTEN.
WARNING
FAN FALL HAZARD
To prevent SERIOUS INJURY or DEATH:
• ALWAYS tighten setscrew with pliers.
• DO NOT hand tighten setscrew.
• CHECK the setscrew is tight using pliers
each time you change fan direction.
5
Ceiling Bracket
Downrod
Installing the Downrod
Hanging the Fan
Hanging Fan
Wiring
5
Lower the adapter cover until it rests flush
against the motor housing.
Canopy
Blades
NOTICE
To prevent damage to fan,
ALWAYS lift holding either the
fan housing or the downrod.
Place the downrod ball into
the slot in the ceiling bracket.
Light
LED/Glass
Remote
Advertisement
Table of Contents
