Rear Seat Entertainment With Amazon Fire Tv Built-In - If Equipped; Hdmi Projecting; Device Manager - Jeep GRAND CHEROKEE L 2023 Owner's Manual

232 MULTIMEDIA
R S E
EAR EAT NTERTAINMENT
A F TV B -I
MAZON IRE UILT N
E
QUIPPED
Rear Seat Entertainment with Fire TV built-in will let
you control and listen in to the content being
played on the rear entertainment screens. You can
view the contents of the rear screens, lock the rear
screens, change the source of the rear screens, or
turn the rear screens on or off Ú page 234.
HDMI P
ROJECTING
HDMI lets you connect a device to the provided
HDMI port, using an HDMI cable, and project the
device directly to the Passenger Screen. To begin,
plug a device into the HDMI port. Then, press the
HDMI button on the touchscreen.
HDMI will continue to show the menu bar and
Headphone Paring button.
NOTE:
The HDMI Card will not automatically launch

when a new device is connected. The HDMI
Card will show a device connected, and the Card
will need to be pressed.
If the user disconnects a device from the HDMI

port while the HDMI Card is in full screen, the
system will close HDMI and reload the Home
screen.
W D M
ITH EVICE ANAGER
— I
F
1 — Device Settings Button
2 — Phone Connectivity Button
3 — Media Connectivity Button
4 — Android Auto™/Apple CarPlay® Button
5 — Add Device Button
6 — Manage Headphone Button
7 — Do Not Disturb Button
8 — Two Active Phones Button

Device Manager

Device Manager provides an easy place to view all
the devices connected to the Uconnect system and
lets you pair the Driver's smartphone to the
Uconnect system. You will also pair Bluetooth®
headphones to the Passenger Screen from this
screen.
For more information on pairing your smartphone,
refer to your Uconnect Radio Instruction Manual.
To pair a set of Bluetooth® Headphones:
1. If viewing Device Manager in full screen,
press the Add Device button. If viewing Device
Manager on the Home screen, press "Pair
Bluetooth® headphones".
2. From the pop-up, press "Search For
Headphones". The system will begin searching
for the Bluetooth® signal of your headphones.
3. Select the name of your headphones from the
list of possible devices. The system will
connect to the headphones.
NOTE:
The Passenger Screen will connect to previously
paired Bluetooth® headphones after Passenger
Screen activation.