Toyota PRIUS C 2019 Manual page 72

72
1-1. For safe use
WARNING
■ When installing a child restraint system
●
Shake the child restraint system left and right, and forward and backward
to ensure that it has been securely installed.
●
After securing a child restraint system, never adjust the seat.
●
Follow all installation instructions provided by the child restraint system
manufacturer.
●
When a child restraint system with a top tether strap is installed, do not
install the head restraint. The head restraint may interfere with the top
tether strap preventing secure installation of the child restraint system.
●
Make sure to properly store the removed head restraint in a secure place
when you use the child restraint system on the rear seat.
●
When securing some types of child restraint systems in rear seats, it may
not be possible to properly use the seat belts in positions next to the child
restraint without interfering with it or affecting seat belt effectiveness. Be
sure your seat belt fits snugly across your shoulder and low on your hips. If
it does not, or if it interferes with the child restraint, move to a different
position. Failure to do so may result in death or serious injury.
■
Do not use a seat belt extender
If a seat belt extender is used when installing a child restraint system, the
seat belt will not securely hold the child restraint system, which could cause
death or serious injury to the child or other passengers in the event of sud-
den braking, sudden swerving or an accident.
■
To correctly attach a child restraint system to the anchors
When using the LATCH anchors, be sure that there are no foreign objects
around the anchors and that the seat belt is not caught behind the child
restraint. Make sure the child restraint system is securely attached, or it
may cause death or serious injury to the child or other passengers in the
event of sudden braking, sudden swerving or an accident.
PRIUS c_U