Toyota PRIUS C 2019 Manual page 338

338
5-10. Bluetooth
■
Release Tones
●
A continuous tone signal is a character string that consists of numbers and
the characters p or w. (e.g.056133w0123p#1)
●
When the "p" pause tone is used, the tone data up until the next pause tone
will be automatically sent after 2 seconds have elapsed. When the "w"
pause tone is used, the tone data up until the next pause tone will be auto-
matically sent after a user operation is performed.
● Release tones can be used when automated operation of a phone based
service such as an answering machine or bank phone service is desired. A
phone number with continuous tone signals can be registered in the contact
list.
●
Tone data after a "w" pause tone can be operated on voice command during
a call.
PRIUS c_U
®
phone (Multimedia system)