Toyota PRIUS C 2019 Manual page 228

228
4-5. Toyota Safety Sense C
■
If a warning message is displayed on the multi-information display
A system may be temporarily unavailable or there may be a malfunction in
the system.
●
In the following situations, perform the actions specified in the table. When
the normal operating conditions are detected, the warning message will dis-
appear and the system will become operational.
If the warning message does not disappear, contact your Toyota dealer.
When the area around the front
sensor is covered with dirt,
moisture (fogged up, covered
with condensation, ice, etc.), or
other foreign matter
When the temperature around
the front sensor is outside of
the operational range, such as
when the vehicle is in the sun or
in an extremely cold environ-
ment
The area in front of the front
sensor is obstructed, such as
when the hood is open or a
sticker is attached to the part of
the windshield in front of the
front sensor.
●
If the warning message does not disappear even after the normal operating
conditions have returned and the vehicle has been driven for some time,
contact your Toyota dealer.
PRIUS c_U
Situation
To clean the part of the windshield in front
of the front sensor, use the windshield
wipers or the windshield defogger
(P. 376).
If the front sensor is hot, such as after the
vehicle is parked in the sun, use the air
conditioning system to decrease the tem-
perature around the front sensor.
If the front sensor is cold, such after the
vehicle is parked in an extremely cold
environment, use the air conditioning
system to increase the temperature
around the front sensor.
Close the hood, remove the sticker, etc.
to clear the obstruction.
Actions
If a sunshade was used when the vehi-
cle was parked, depending on its type,
the sunlight reflected from the surface
of the sunshade may cause the tem-
perature of the front sensor to become
excessively high.