524
8-2. Steps to take in an emergency
WARNING
■
When removing the 12-volt battery terminals
Always remove the negative (-) terminal first. If the positive (+) terminal con-
tacts any metal in the surrounding area when the positive (+) terminal is
removed, a spark may occur, leading to a fire in addition to electrical shocks
and death or serious injury.
■
Avoiding 12-volt battery fires or explosions
Observe the following precautions to prevent accidentally igniting the flam-
mable gas that may be emitted from the 12-volt battery:
●
Make sure each jumper cable is connected to the correct terminal and that
it is not unintentionally in contact with any other than the intended terminal.
●
Do not allow the other end of the jumper cable connected to the "+" termi-
nal to come into contact with any other parts or metal surfaces in the area,
such as brackets or unpainted metal.
●
Do not allow the + and - clamps of the jumper cables to come into contact
with each other.
●
Do not smoke, use matches, cigarette lighters or allow open flame near
the 12-volt battery.
■
After recharging the 12-volt battery
Have the 12-volt battery inspected at your Toyota dealer as soon as possi-
ble.
If the 12-volt battery is deteriorating, continued use may cause the 12-volt
battery to emit a malodorous gas, which may be detrimental to the health of
passengers.
PRIUS c_U