Jabra Perform 45 - Mono Bluetooth Headset Manual

Welcome

Jabra Perform 45 features:

• Small, lightweight, and discreet, so you always look approachable to customers
• 80% noise-cancelling microphone and crystal-clear sound keeps communication smooth
• Push-to-Talk lets you instantly communicate with colleagues
• Easy to set up and intuitive to use, with a durable, simple-to-sanitize design
• Up to 20 hours Push-to-Talk usage, and up to 100m / 300ft wireless range

Jabra Perform 45 overview

Included accessories

Optional accessories

Optional accessories are available at jabra.com/accessories

How to wear

The headset can be worn on the left or right ear.

To wear the headset on the other ear, rotate the microphone horizontally to the other side. Then swivel the microphone up and over and point it towards your mouth.

Selecting an EarGel

It is important to wear the headset with the most comfortable EarGel size for your ears. This will ensure the best audio experience.

How to get the perfect fit

For the best audio quality and comfort, the eargel should fit firmly in your ear, but should not be squeezed into your ear canal.

How to charge

To charge the headset, connect the USB charging cable to the headset's USB charging port. It is recommended to charge the headphones using the supplied charging cable. It takes up to 140 minutes to fully charge the battery.

While charging, the LED indicator shows the charging status. Red indicates the headset is charging. Blue indicates the headset is fully charged.

How to connect

Power on

Press and hold the Multi-function button for 1 second until the LED flashes blue and you hear "Power on".

Power off

Press and hold the Multi-function button for 3 seconds until the LED flashes red and you hear "Power off".

Pair to your smartphone

1. Ensure the headset is powered off.
2. Press and hold the Multi-function button for approx. 6 seconds until you hear "Pair mode" and the LED flashes red and blue. The headset is now ready to pair.
3. Go to the Bluetooth menu on your smartphone and select the Jabra Perform 45 from the list of available devices.

Connect to your smartphone using NFC

1. Ensure your headset is powered on, and that NFC is enabled on your smartphone.
2. Place the NFC zone of your smartphone against the NFC zone of the headset until your smartphone confirms the connection.
   

Please note that not all phones support NFC pairing.

How to use

Calls

What the buttons do
	Answer call	Press the Multi-function button or say "Answer"
	End call	Press the Multi-function button
	Reject call	Press and hold (2 sec) the Multi-function button or say "Ignore"
	Activate Voice Assistant (i.e. Siri, Google Assistant)	Press the Multi-function button when not on a call
	Adjust volume	Press the Volume up or Volume down button, when listening to music or on a call.
	Turn LEDs on/off	Press both the Volume up and Volume down buttons simultaneously
	Transfer audio from headset to smartphone	While on a call, press and hold (2 sec) the Volume down button to transfer to the call audio to your paired smartphone. Repeat to transfer the call audio back to your headset.
	Redial last number	Press and hold (1 sec) the Volume down button until you hear a beep.
	Mute/unmute microphone	Press the Customizable button when on a call. Alternatively, press and hold (2 sec) the Volume up button.
	Mute/unmute microphone and speaker during a call	Swivel the microphone up during a call to mute the microphone and speaker. Swivel the microphone down to unmute.

The Customizable button

By default, the Customizable button activates the voice controls, or mutes the microphone when on a call. However, the button can be configured for other functions, such as push-to-talk, speed dial, access a second paired mobile device, or to check the battery level.

To reconfigure the Customizable button, download and use Jabra Direct.

Multiple call handling

The headphones can accept and handle multiple calls at the same time.

Multiple call handling
	End current call and answer incoming call	Press the Multi-function button to end the current call. Then press the Multi-function button to answer the incoming call
	Put current call on hold and answer incoming call	Press the Multi-function button twice
	Reject incoming call when on a call	Press and hold (2 sec) the Multi-function button

Voice controls

The headset recognizes English voice commands, enabling call handle without touching the headset.

Press the customizable button (when not on a call) to activate the voice controls. For a list of available commands, say: "What can I say?"

List of voice controls:

• "Answer" – answers an incoming call
• "Ignore" – rejects an incoming call and sends it to voicemail (if available)
• "What can I say?" – announces a list of available commands
• "Pair mode" – puts the headset into pairing mode
• "Am I connected?" – verifies that the headset is connected to a device
• "Check battery" – announces battery levels for the headset and paired device (if applicable)
• "Redial" – redials the last outgoing call
• "Callback" – calls the last incoming call
• "Cancel" – cancels voice control

Multipoint mode

The headset can pair to 8 smartphones and connect to two at once (Multipoint mode).

To connect to two smartphones, use the normal pairing process separately for each smartphone (refer to section 5).

The headset will monitor both smartphones and enable you to answer a call on either one using the headset.

If you are on a call and the other smartphone receives a call, you will hear a notification in the headset.

Reset headset

Resetting the headphones clears the list of paired devices and resets all settings.

1. Ensure the headset is powered on.
2. Press and hold (10 sec) both the Volume down button and the Customizable button until you hear two beeps.
3. Power off the headset.

You will need to re-pair the headset to your smartphone.

Jabra Direct app

Jabra Direct is a desktop application designed to support, manage and enable optimal functionality for Jabra devices.

Download the latest free version from jabra.com/direct

Support

FAQ

View the FAQs at jabra.com/help/perform45

How to care for your headset

• To prevent the depletion of the battery lifetime or capacity, avoid storing the headset in hot or cold environments, such as a closed vehicle in summer or in winter conditions.
• For daily sanitization, 70% isopropyl alcohol wipes are recommended.
• When exposed to water, allow the headset sufficient time to dry. It may take up to one hour for the headset to dry thoroughly.
• Do not store the headset for extended periods of time without recharging them (max. three months).

How to clean your headset

1. Apply normal dish soap and water to a cloth, making sure to wring out any excess liquid so the cloth is not dripping wet. Use soap and water only; do not use strong cleaning agents.
2. Gently wipe the headset with the wet cloth, making sure the headset is clean with no layer of suds on the surface.
3. Let the headset rest for at least one minute.
4. Wipe the headset clean with a cloth dampened with water only.
5. Allow the product to dry.