Advertisement
The Jabra Evolve 40 can be worn on the left or right by flipping the microphone to the other side (270° limit).
Adjust the headband to find the most comfortable fit.
It is recommended to position the microphone close to your mouth (0.5 inches).
The microphone is bendable for personal preference.
When listening to music or outdoors, the microphone can be stored in the headband groove.
Fully plug the headset into the controller, and connect the controller to a USB port on the PC.
The headset jack MUST be fully inserted into the controller for the headset to work.
NOTE: When the headset is disconnected from the controller, any active call will be put on hold. To resume the call, reconnect the headset to the controller and manually resume the call on the PC (softphone).
Plug the headset directly into your mobile device.
NOTE: When plugged directly into a mobile device, the overall call quality (for you and the listener) will be lower than when connected to a PC/tablet using the controller (Jabra Evolve Link).
FUNCTION | ACTION | |
Answer/end call | Tap the Answer/end button | |
Reject call | Double-tap the Answer/end button | |
Battery and connection status | Tap the Answer/end button when not on a call | |
Adjust volume | Tap the Volume up or Volume down button | |
Busylight on/off | Tap the Busylight button | |
Mute/unmute microphone | Tap the Mute microphone button |
FUNCTION | ACTION | |
| End current call and answer incoming call | Tap the Answer/end button |
Switch between held call and active call | Press and hold (2 secs) the Answer/end button | |
Put current call on hold and answer incoming call | Press and hold (2 secs) the Answer/end button | |
Reject incoming call, when on a call | Double-tap the Answer/end button |
The headset can accept and handle multiple calls at the same time.
The busylight indicator on the headset and the controller indicates to others when you are busy.
MANUALLY TURN BUSYLIGHT ON/OFF
To manually activate the busylight on/off, tap the Busylight button on the controller. The busylight can be activated even when you are not on a call.
ENABLE/DISABLE BUSYLIGHT FUNCTION
To enable/disable the busylight function, press and hold (3 secs) Busylight button on the controller.
View the FAQs on Jabra.com/evolve40
JABRA EVOLVE 40 HEADSET | SPECIFICATION |
Headset weight: | Mono headset 80 g Stereo headset 113 g |
Controller weight: | 55 g |
Headset dimensions: | Mono headset L 155.4 mm x W 58.6 mm x H 181 mm Stereo headset L 155.5 mm x W 58.6 mm x H 180.9 mm |
Controller dimensions: | W 54 mm x H 14 mm |
Microphones: | Noise cancelling microphone |
Speaker: | 28 mm Dynamic PureSound speakers (Hi-Fi) |
Speaker maximum input power: | 10 mW |
Speaker frequency range: | 70 hz - 20 kHz |
Cable length: | Controller to PC: 90 mm Headset to 3.5mm jack: 1.2 m |
Noise reduction: | Up to 98% cancellation using Hybrid Active Noise Cancellation |
ANC time: | Up to 24 hours |
Operating temperature: | -10°C to 55°C (14°F to 131°F) |
Storage temperature: | -20°C to 25°C (-4°F to 77°F) |
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the EVOLVE 40 that isn't answered in the manual? Leave your question here.