H3C PSR600-54A-B Installation Manual page 23

2. Use the grounding screw to attach the ring terminal of the grounding cable to the grounding
screw hole. Fasten the screw.
IMPORTANT:
Orient the grounding cable as shown in
removable components.
Figure2-17 Connecting the grounding cable to the chassis
1
(1) Grounding screw
(3) Grounding sign
(5) Grounding cable
Connecting the grounding cable to a grounding strip
Use either of the following methods to connect the grounding cable to a grounding strip in the
equipment room:
•
Method 1
a. Use needle-nose pliers to bend the bare metal part to the shape as shown in Figure2-18.
Make sure the bended part can securely attached to the grounding post on the grounding
strip.
b. Attach the bended part of the grounding cable to the grounding post and use the hex nut to
fasten the bended part to the post.
Figure2-18 Connecting the grounding cable to a grounding strip
4
(1) Grounding post
(3) Grounding cable
•
Method 2
2 3
5 4
1
3
Figure2-17 so that you can easily install or remove the
(2) Ring terminal
(4) Grounding hole
2
2-13
(2) Grounding strip
(4) Hex nut