Table of Contents
Advertisement
Figure2-6 Attaching the front mounting brackets to the port-side mounting position
(S6520X-30HF-EI switch as an example)
Figure2-7 Attaching the front mounting brackets to the power supply-side mounting position
(S6520X-30HF-EI switch as an example)
Mounting the switch in the rack
This task requires two people.
To mount the switch in the rack:
1.
Wear an ESD wrist strap and make sure it makes good skin contact and is reliably grounded.
2.
Verify that the front mounting brackets have been securely attached to the switch chassis. See
"Attaching the front mounting brackets to the
3.
Attach cage nuts to the front rack posts.
4.
One person supports the bottom of the switch, and moves the switch to an appropriate position
based on the installation positions of the front mounting brackets.
switch."
2-6
Advertisement
Table of Contents
