Table of Contents
Advertisement
5.
Another person uses M6 screws and cage nuts to attach the mounting brackets to the rack and
verifies that the brackets are level and secure.
Figure2-8 Mounting the switch in the rack (port-side mounting position for the front
mounting brackets, S6520X-30HF-EI switch as an example)
Figure2-9 Mounting the switch in the rack (power supply-side mounting position for the front
mounting brackets, S6520X-30HF-EI switch as an example)
Rack-mounting the switch by using front and rear mounting
brackets
Attaching the front mounting brackets and shoulder screws to the switch
The switch provides two installation positions on its side for the front mounting brackets. One is near
the power supply side and one is near the port side. The following procedure attaches the front
mounting brackets to the installation position near the power supply side. The port-side mounting is
similar.
To attach the front mounting brackets and shoulder screws to the switch:
1.
Wear an ESD wrist strap. Make sure the strap makes good skin contact and is reliably
grounded.
2-7
Advertisement
Table of Contents
