Adjusting The Monitor Position; Adjusting The Slide Position - Pyle PLTV71 User Manual

ADJUSTING THE TILT POSITION
1. Press the MENU button to select FUNCTION menu
2. Press the SEARCH UP/DOWN button to select TILT.
3. Press the VOLUME ◀ button when MOVE FORWARD is selected.
Each time you press the VOLUME ◀ button, the monitor will slant backward one
step each. The TILT position can be adjusted in 5 steps: +2, +1, 0, -1, -2.
4. Press the VOLUME ▶ button when MOVE FORWARD is selected. Each time you
press the VOLUME ▶ button, the monitor will slant forward one step each. The TILT
position can be adjusted in 5 steps: +2, +1, 0, -1, -2.
NOTE
1. When MOVE BACKWARD is selected, the TILT position can be adjusted in 4 steps:
+1, 0, -1, -2.
For more informatin, see page 8.
2. When a CD/VCD changer is connected to this unit, the TILT UP/DOWN button on the
remote controller on CDC mode changes to adjusting buttons to adjust the lever of the
selected items on CD CHANGER menu.
3. To control the air conditioner button and etc behind the monitor that is opened, press
the TILT UP/DOWN button on the unit for more than 3 seconds.
The monitor slants forward until it goes to horizontal postion.
Press the TILT UP/DOWN button again to return to original postion.

ADJUSTING THE SLIDE POSITION

1. Press the MENU button to select FUNCTION menu.
2. Press the SEARCH UP/DOWN button to select MOVE
3. Press the VOLUME ◀ button when MOVE BACKWARD is selected.
The monitor will slide one step (15mm) to the front.
4. Press the VOLUME ▶ button when MOVE FORWARD is selected.
The monitor will slide one step (15mm) to the back.
NOTE
1. If the VOLUME◀ button is pressed when MOVE FORWARD is selected, CHECK the
monitor will not slide to the front..
2. If the VOLUME ▶ button is pressed when MOVE BACKWARD is selected, the monitor
will not slide to the back.
3. If the VOLUME ◀ or ▶ button is pressed when TILT position is at +2, the monitor will
not slide at all.

ADJUSTING THE MONITOR POSITION

15