Table of Contents
Advertisement
Function Instructions
Power on/off & mute button(
)
Press this button on panel/remote control to turn on the player.In turn on mode,
Press this button to activate the selecting mode of mute on/off.Press it for over
2 seconds to turn off the unit.
Volume control button(VOL+/-)
Press VOL+/- on panel or press it on remote control anytime to increase or
'
'
decrease the volume.
Radio DVD/video/USB switch(MODE)
press ' MODE ' button to switch as following:
Radio
DVD
USB
1.In radio mode, press it change to disc playing mode.If no disc but with USB
in the unit, it will change to USB mode automatically.
2. In disc playing mode, press this button to change to USB mode.If no USB in
the unit, It will change to outer video AV/AUX input mode automatically.
3. In USB mode, press this button to change to outer video AV/AUX input mode.
Press it again to resume the radio mode.
Reset button(RESET)
Press this button on panel to reset all the setting to default.
Band switch & play/pause
In radio mode, press this button time and again to select needed band [FM1,FM2,
FM3,AM1,AM2,AM3].
In playing disc mode, means disc playing or pause function.
Clock display button(CLK)
1. Press
'CLK' button will
display the time on screen.
2. Press it
over 2 sec to enter the time adjust mode, the minute flashes,
VOL
'+/-' to adjust it, then press 'CLK' again, the hour flashes, press VOL'+/-'
to adjust it, after adjusting press it over 2 sec. the time will stop flashing.
Notice: The time will not disappear automatically. If you wouldn't like to display
the time, press 'CLK' once again.
TFT OFF button
Press 'TFT OFF' button on panel to close or open the TFT monitor.
Stereo and L/R channel button(S.L.R)
1. In FM band, press this button to switch Mono, Stereo output.
2. In disc playing mode, if the contents of disc have channel switch function,
press it to switch Stereo/Left/Right channel output.
9
AV
press
Touch screen function introduction
digit add 1 (If select track 35, first touch 10+ three times, then touch
5 ). ( VCD/DVD only)
13
QUIT For page quit button, touch it to quit the current page to return to
last page.
E Multi-functional setup interface operation
After entering this interface AUDIO for audio setup interface see picture
9-1
VIDEO for picture setup interface see picture 9-2
display accord interface ( see picture 9-3
setup interface see picture 9-4 .
AUDIO VIDEO
OSD
1
2
3
QUIT
EQ
Picture 9-1
Audio setup
1 Front/rear speaker setup touch
touch
to setup the volume of rear speaker.
2 Left/right channel setup, touch
touch
to setup the volume of right speaker.
3 Interface quit button, touch QUIT button to return the last page.
4 Personal EQ storage setup
Touch any one of 1 - 5 on screen. Then adjust BAS/TRE/LOUD the
setup parameter will store to one of 1 - 5 which selected.
5 Loud setup
Touch LOUD
to close LOUD, the monitor show
Touch LOUD
to open LOUD, the monitor show
34
OSD for screen
SYS for country system select
SYS
--
7
BASS
--
6
TRE,
5
LOUD
OFF
1
2
3
4
5
4
to setup the volume of front speaker,
to setup the volume of left speaker,
OFF
ON
Advertisement
Table of Contents
