Disc Handling And Maintenance - Pyle PLTSD62 User Manual

Pyle pltsd62: user guide
Table of Contents

Advertisement

Disc Handling And Maintenance

Disc Using
Disc Using
To keep the disc clean, please hold the disc edge only, do not touch its
surface.
Do not stick the label or adhere things on the disc.
Correct
Incorrect
Do not expose the disc into direct sunshine or near the hot sources.
After playing, please store it into the disc box.
Disc Cleaning
Disc Cleaning
1 1
Before playing, wipe the disc with a clean cloth, from the centre hole
towards the outer edge .
2 2
Never use alcohol, thinner, cleaning fluid, static electricity prevention
liquids or any other solvent to clean discs.
Disc Storing
Disc Storing
After playing, please store the disc into the di s c box and keep them in room
temperature. It can help to extend the using life of the disc effectively.
5
Troubleshooting
Common Trouble
Reason
Trouble
The down-lead and tie-in
has disconnected.
The power
fails to put
through the
Fuse broke off.
unit does not
work
The noise and other factor
caused the Built-in MPU
fails to work normally.
The wire has discconnected. Connect the wire correctly.
The unit enforcing the play
No sound
with repose, slow motion or
per frame to play.
The grip brake wire has
disconnected.
No picture
The grip brake has not
pulled up.
The disc forbid operating.
Icon
display,
the operation
This operation's structure
is unable to
with the disc do not
carry on
compatible.
Audio and
The unit installed loose.
video leap
Touch screen
Built-in MPU is unable to
can t operate
'
normal work.
normally by
tiuching
The remote control does
The remote
not aim at its receiver
window.
control does
not work
The battery of remote
control die down.
Fail to reset
tune in radio
mode.
38
Measure
Please check whether the power
has been connected correctly.
Removes reason which the fuse
broke off, then chang the fuse.
For god's sake to install the right
same tating fuse.
Press 'RESET' button.
Enforce the repose, slow motion
or per frame to play has no
sound.
Connect the grip brak wrie, then
pull it up.
Connect the grip brak wrie, then
pull it up.
The operation is unable to cany
on.
The operation is unable to cany
on.
Fix the unit steadily.
After launder the operations
normally.
The remote control aimed its
receive window.
Please use new battery instead.
Radio signal too low to store the
correct frequenly into the
storage.

Advertisement

Table of Contents
loading

Table of Contents