68007024014-GK
Advanced Features
•
or to Rpgm then press the Menu Select button directly below Rpgm to send reprogram
request to the dispatcher.
The display shows Reprogram Rqst and Please wait.
If you hear five beeps, the dispatcher has acknowledged the reprogram request. The display shows
Ack received and the radio returns to the Home screen.
If the dispatcher does not acknowledge the reprogram request within six seconds, you hear a low-
pitched alert tone and the display shows No acknowledge. Try again or press
return to the Home screen.
2.2.6.2
Classification of Regrouped Radios
The dispatcher can classify regrouped radios into Select Enabled or Select Disabled categories.
Select Enabled
Select-enabled radios are free to change to any available channel, including the dynamic-
regrouping channel, once you have selected the dynamic-regrouping position.
Select Disabled
Select-disabled radios cannot change channels while dynamically regrouped. The radio is forced to
remain on the dynamic-regrouping channel.
The Scan and Private Call features are unavailable when your radio is Select Disabled.
2.2.7
Dynamic Zone Programming (DZP)
NOTICE: Your radio must be preprogrammed to allow you to use this feature. This feature
works on the condition at least one zone in the radio must be a non-dynamic zone.
This feature provides one or more Dynamic Zones to store frequently used channels be it conventional
or trunking. These dynamic channels are saved from pre-existing (non-dynamic) channels in the radio.
This saves the time and effort from the regular navigation around the working zones and channels.
User can also delete or update the list in the Dynamic Zone.
2.2.7.1
Entering the Dynamic Zone to Select a Dynamic Channel
Procedure:
1
or to Zone then press the Menu Select button directly below Zone.
The display shows the Zone screen.
2
or
to <# Dynamic Zone Channels>.
3 Perform one of the following actions.
•
Press the Menu Select button below Sel to select.
•
Press the Menu Select button below Exit to exit.
If you have selected one of the Dynamic Zone Channels list, the display returns to Home screen
with the selected <# Dynamic Zone Channels> shown on the screen.
56
to cancel and