2.24.27
Front Panel Programming
You are able to customize certain feature parameters in Front Panel Programming (FPP) to enhance
the use of your radio.
2.24.27.1
Entering the Front Panel Programming Mode
You can follow this procedure to enter the front panel programming (FPP) mode on your radio.
2.24.27.1.1
Federal
Procedure:
1 Press or to FPP and press the Menu Select button directly below FPP.
The radio displays the Enter password screen.
2 Perform one of the following actions and proceed to the next step:
•
Press the Menu Select button directly below Ok.
•
Enter the password and press the Menu Select button directly below Ok.
If the password is not entered, the radio displays the non-password protected zones only.
3 Press
or
to select Zn/Ch.
4 Press
or
to select the required zone.
5 Press
or
to select the required channel.
The display shows the radio parameter screen.
6 Press
or
to select the required parameter to edit.
2.24.27.1.2
Non-Federal
Procedure:
1 Press or to FPP and press the Menu Select button directly below FPP.
The radio displays the Enter password screen
2 Enter the password and press the Menu Select button directly below Ok.
3 Press
or
to select Zn/Ch.
4 Press
or
to select the required zone.
5 Press
or
to select the required channel.
The display shows the radio parameter screen.
6 Press
or
to select the required parameter to edit.
68007024014-GK
Advanced Features
133