Measuring The Distance And Bearing From A Saved Waypoint; Location Feature In Emergency Mode; Peer-Location On The Display (Astro Conventional Only) - Motorola APX MOBILE O9 User Manual

NOTICE: You cannot delete any of the preprogrammed waypoints.
Procedure:
1 Press the Menu Select button directly below Options.
2 or to Waypoints and press the Menu Select button directly below Select.
The display shows a list of waypoints.
3 or to the required saved waypoint, and press the Menu Select button directly below
Options.
4 or to Delete All and press the Menu Select button directly below Select.
The display shows Delete All saved waypnts Confirm?.
5 Press the Menu Select button directly below Yes to delete all waypoints or press the Menu
Select button directly below No to return to the Waypoints main screen.
The display shows All saved waypnts deleted.
2.15.13

Measuring the Distance and Bearing from a Saved Waypoint

Prerequisites: Ensure your radio shows the current location on the screen.
Procedure:
1 Press the Menu Select button directly below Options.
2 or to Dist frm here and press the Menu Select button directly below Select.
The display shows a list of waypoints.
3 or to the required waypoint and press the Menu Select button directly below Select.
The display shows the distance and bearing from the current to the selected coordinates.
2.15.14

Location Feature in Emergency Mode

When the Emergency feature is activated by pressing the emergency button, the radio exits the
Location menu and returns to the Home (default) screen so that you can see which channel the
emergency signal is going out on.
However, you may re-enter the Location menu while still in emergency mode, provided that Silent
Emergency has not been activated.
If you have turned Location off using the ON/OFF menu key, it automatically turns back on when
Emergency is activated.
If there is a solid location signal during Emergency, the current location and the location information
received is saved as Emergency and Last Known Location waypoints, respectively.
2.15.15

Peer-Location on the Display (ASTRO Conventional only)

This feature is only available for radio-to-radio voice transmissions, dispatch call and selective call in
conventional ASTRO system. For radio-to-radio transmission, in order to allow the radio to show peer-
location, the voice should be directly sent from one radio to another radio without passing through any
infrastructure facility such as repeaters, phone, or DVRS system. Both the transmitting radio and
68007024014-GK
Advanced Features
101