Location Of Cooker - Rangemaster Classic 90 Dual Fuel User's Manual & Installation Instructions

Check the appliance is electrically safe and gas sound when you have finished.

Location of Cooker

The cooker may be installed in a kitchen/kitchen diner but
NOT in a room containing a bath or shower.
This appliance is designed for domestic cooking only. Use for
any other purpose could invalidate any warranty or liability
claim.
Note: An appliance for use on LPG must not be installed
in a room or internal space below ground level, e.g. in a
basement.
You will need the following equipment to complete the
cooker installation satisfactorily:
• Stability bracket: If the cooker is to be supplied with
gas through a flexible hose, a stability bracket or chain
MUST be fitted. These are not supplied with the
cooker but are available at most builders' merchants.
• Gas pressure tester/manometer.
• Flexible gas hose: Must be in accordance with the
relevant standards.
• Multimeter: For electrical checks.
You will also need the following tools:
1. Electric drill
2.
Masonry drill bit (only required if fitting the cooker on a
stone or concrete floor)
3. Wall plugs (only required if fitting the cooker on a stone
or concrete floor)
4.
Steel tape measure
5.
Cross head screwdriver
6. Flat head screwdriver
7.
Spirit level
8. Pencil
9. Adjustable spanner
10. Allen keys (for Classic – supplied)
11. Screws for fitting stability bracket
12. 13 mm spanner (or socket wrench)
INSTALLATION
Checking the Parts:
3 pan supports
ArtNo.000-0001 90 Pan supports
Griddle
2 flat shelves
Roasting tin
ArtNo.324-0004 Roasting tin
Plinth
24
Splashback
ArtNo.421-0002 - Splashback
Grill pan & trivet
ArtNo.330-0001 - Grill pan
Handyrack
ArtNo.324-0003 Handyrack
Tall oven shelves and shelf supports
ArtNo.000-0010 Tall oven shelves
Stability location bracket