Table of Contents
Advertisement
•
The first time you use the machine, the water circuit is
empty and the appliance could be very noisy.The noise
becomes less as the circuit fills.
•
Coffee has been used to factory test the appliance and it
is therefore completely normal for there to be traces of
coffee in the mill. The machine is, however, guaranteed to
be new.
1. Connect the appliance to a mains socket (fig. 1);
2. "Language": press the scroll arrows
(B10) until the required language is displayed, then press
(B11) to confirm.
Follow the instructions indicated on the appliance display:
3. Remove the water tank (A14) (fig. 2), fill to the MAX line
(marked on the tank) with fresh water (fig. 3), then put the
tank back in the appliance (fig. 4);
4. Check that the hot water spout (C6) is inserted on the con-
nection nozzle (A10) (fig. 5) and place a container holding
a minimum of 100 ml underneath (fig. 6);
1
(B3) or
3
5. Press
from the water spout then goes off automatically.
The coffee machine is now ready for normal use.
Please note:
•
The first time you use the appliance, you need to make 4
- 5 cappuccinos before it starts to give satisfactory results.
•
To enjoy your coffee even more and improve the perfor-
2
mance of your appliance, we recommend installing a water
softener filter (C4) as described in section "14. Water sof-
tener filter". If your model is not provided with a filter, you
can request one from De'Longhi Customer Services.
4. TURNING THE APPLIANCE ON
Please note:
Each time the appliance is turned on, it performs an automatic
preheat and rinse cycle which cannot be interrupted. The appli-
ance is ready for use only after completion of this cycle.
Danger of burns!
During rinsing, a little hot water comes out of the coffee spouts
(A9) and is collected in the drip tray (A19) underneath. Avoid
contact with splashes of water.
4
5. TURNING THE APPLIANCE OFF
Whenever the coffee machine is turned off after being used to
make coffee, it performs an automatic rinse cycle.
6
5
(B11)to confirm. The appliance delivers water
•
To turn the appliance on,
press the
(A7) (fig. 7).
•
After heating, the ap-
pliance
performs a rinse cycle. As
well as heating the boiler,
this also heats the inter-
nal circuits by circulating
hot water.
The appliance is ready for
use when the main screen
7
appears.
6
button
automatically
Advertisement
Table of Contents
Troubleshooting
