Table of Contents
Advertisement
4. Then select your required coffee:
Recipe
Espresso (B7)
Coffee (B8)
Long (B9)
Coffees selectable from
with
(B4)
Ristretto
Espresso lungo
5. Preparation begins. The selected beverage appears on the
display, together with a progress bar which gradually fills
as preparation proceeds.
Please note:
At the end of delivery, to increase the quantity of coffee in the
cup, just press "EXTRA"
required quantity is reached, stop with
Important! Making LONG coffee
Halfway through preparation, the machine requests a further
level measure of pre-ground coffee. Proceed, then press
(B11).
Please note:
•
If "Energy Saving" mode is active, you may have to wait a
few seconds before the first coffee is delivered.
•
Various alarm messages could be displayed while using the
appliance (Fill tank, Empty grounds container, etc.). Their
meaning is explained in section "17. Troubleshooting".
•
For hotter coffee, see section "7.5 Tips for a hotter coffee".
•
If the coffee is delivered a drop at a time, too weak and not
creamy enough or too cold, read the tips in section "17.
Troubleshooting".
7.4 Adjusting the coffee mill
11
Quantity
≃ 40 ml
≃ 180 ml
≃ 160 ml
(B10) and confirming
≃ 30 ml
≃ 120 ml
(B10) within 3 seconds. When the
(B3).
:
The coffee mill is factory-set
in such a way that the coffee
will be delivered correctly and
should not require regulating
initially.
However, if after making the
first few coffees you find that
the coffee is either too weak
and not creamy enough or de-
livery is too slow (a drop at a
time), this can be corrected by
adjusting the grinding adjust-
ment dial (A5) (fig. 11).
Please note:
The grinding adjustment dial must only be turned when the
coffee mill is in operation during the initial phase of coffee
preparation.
If the coffee is delivered too slowly or not
at all, turn one click clockwise towards 7.
For fuller bodied creamier coffee, turn
one click anticlockwise towards 1 (do not
turn more than one click at a time other-
wise the coffee could be delivered a drop
at a time).
The effect of the adjustment will be noticed only after making
at least a further 2 cups of coffee. If this adjustment does not
produce the desired result, turn the dial another click.
7.5 Tips for a hotter coffee
For hotter coffee, proceed as follows:
•
perform a rinse cycle by selecting the "Rinsing" function in
the settings menu (section "6.1 Rinsing");
•
warm the cups with hot water using the hot water function
(see section "10. Delivering hot water");
•
increase the coffee temperature in the "Settings" menu
(see section "6.4 General"). Varying the temperature has
most effect for long beverages.
8. MAKING CAPPUCCINOS AND MILK-BASED
COFFEES
Please note:
To avoid milk with poor froth or large bubbles, always clean the
milk container lid (D2) and hot water connection nozzle (A10)
as described in sections "8.4 Cleaning the milk containerafter
every use", "11.10 Cleaning the milk container" and "11.11
Cleaning the hot water nozzle".
8.1 Filling and attaching the milk container
1. Lift the milk container lid (D2) (fig. 12);
2. Fill the milk container (D5) with a sufficient quantity of
milk, not exceeding the MAX level marked on the contain-
er (fig. 13);
10
12
13
Advertisement
Table of Contents
Troubleshooting
