Table of Contents
Advertisement
408
6-3. Do-it-yourself maintenance
5
Drive straight (with occasional left and right turns) at approxi-
mately 25 mph (40 km/h) or more for approximately 10 to 30 min-
utes.
Initialization is complete when the position of each tire is determined
and the inflation pressure of each tire is displayed on the multi-infor-
mation display.
Initialization may take longer than approximately 30 minutes in cer-
tain situations, such as when the vehicle is stopped for a long time at
traffic lights, etc. (→P. 412)
◆
Registering ID codes
Every tire pressure warning valve and transmitter has a unique ID
code. When replacing a tire pressure warning valve and transmitter,
it is necessary to register the ID codes.
To register the ID codes, perform the following procedure:
1
Press the tire pressure warn-
ing reset switch 3 times until
the tire pressure warning
light blinks slowly 3 times.
Then a message will be dis-
played
display.
When registration is being per-
formed, the tire pressure warn-
ing
light
approximately 1 minute then
illuminate and "- -" will be dis-
played for the inflation pres-
sure of each tire on the multi-
information display.
SEQUOIA_OM_USA_OM0C011U
on
multi-information
will
blink
for
Advertisement
Table of Contents
