Table of Contents
Advertisement
3
Press and hold the desired
HomeLink
vehicle) for 2 seconds and
release
sequence
release) up to 3 times to
complete programming.
If the garage door opener
motor operates when the
HomeLink
pressed, the garage door
opener motor recognizes the
HomeLink
■
Enabling 2-way communication with a garage door (only avail-
able for compatible devices)
When enabled, 2-way communication allows you to check the sta-
tus of the opening and closing of a garage door through indicators
in your vehicle.
2-way communication is only available if the garage door opener
motor used is a compatible device. (To check device compatibility,
refer to www.HomeLink.com.)
1
Within 5 seconds after programming the garage door opener has
been completed, if the garage door opener motor is trained to
HomeLink
idly green and the light on the garage door opener motor will
blink twice, indicating that 2-way communication is enabled.
If the indicators do not flash, perform
presses of the HomeLink
completed.
SEQUOIA_OM_USA_OM0C011U
®
button (inside the
it.
Repeat
this
(press/hold/
®
button
is
®
signal.
®
, both garage door operation indicators will flash rap-
®
button after programming has been
5-4. Other interior features
2
and
3
within the first 10
367
5
Advertisement
Table of Contents
