Toyota Sequoia 2018 Manual page 322

322
5-1. Using the air conditioning system and defogger
Using automatic mode
1 Press
The air conditioning system begins to operate. Air outlets and fan speed
are automatically adjusted according to the temperature setting.
2
Adjust the temperature setting.
3 To stop the operation, press
■
Automatic mode indicator
If the fan speed setting or air flow modes are operated, the auto-
matic mode indicator goes off. However, automatic mode for func-
tions other than that operated is maintained.
■
Adjusting the temperature for driver and passenger seats sep-
arately ("SYNC" mode)
Perform the following procedures to turn on the "SYNC" mode:
● Press
● Adjust the passenger's side temperature setting.
The indicator comes on when the "SYNC" mode is on.
While in "SYNC" mode, the temperature of the rear air outlets is
set at the right-hand side temperature setting.
Other functions
■
Switching between outside air and recirculated air modes
Press
The mode switches between outside air mode (the indicator is off) and
recirculated air mode (the indicator is on) each time the button is
pressed.
SEQUOIA_OM_USA_OM0C011U
.
.
.
.