Toyota Sequoia 2018 Manual page 275

Table of Contents

Advertisement

The shape of an object may prevent the sensor from detecting it. Pay partic-
ular attention to the following:
• Wires, fences, ropes, etc.
• Cotton, snow and other materials that absorb sound waves
• Sharply-angled objects
• Low objects
• Tall objects with upper sections projecting outwards in the direction of
your vehicle
• People, animals and other moving objects
• People wearing certain types of clothing
The following situations may occur when using the intuitive parking assist.
• Depending on the shape of the object and other factors, the detection dis-
tance may be shortened, or detection may not be possible.
• Objects may not be detected if they are too close to a sensor.
• There will be a short delay between the detection of an object and display
of the detection. Even at slow speeds, there is a possibility that the object
will come within a sensor's detection area before the display is shown
and a warning beep sounds.
• Thin posts or objects lower than a sensor may not be detected when
approached, even if they have been detected once.
• It might be difficult to hear beeps due to the volume of the audio system
or air flow noise of the air conditioning system.
If a message is displayed on the multi-information display
→P. 457
Customization that can be configured at Toyota dealer
Settings (e.g. buzzer volume) can be changed.
(Customizable features →P. 520)
Certification (Canada only)
This ISM device complies with Canadian ICES-001.
SEQUOIA_OM_USA_OM0C011U
4-5. Using the driving support systems
275
4

Advertisement

Table of Contents
loading

Table of Contents