Olivetti d-Copia 3003MF Service Manual page 183

17. Check or replace the high voltage PWB
and refit all the removed parts.
When refitting the high voltage PWB, be
careful about following points.
- Position the ground plate so that it is
atop the high voltage PWB.
- Each interface is firmly in contact with
each spring.
- The bias contact pin must be installed
in the specified position.
- The cassette pin must be inserted in
the cassette pin holder.
Service Manual
High voltage PWB
Grounding
plate
Spring
(Transfer)
Spring
(Main charger)
Bias
contact pin
Cassette
pin
Spring
(Developing)
1-5-46
2MH/2MJ/2MK/2ML
High voltage PWB
High voltage
PWB
Cassette pin holder
Figure 1-5-69
Y113860-1