Jonsered CS 2252 Workshop Manual page 50

Repair Instructions
Replacing the carburettor's heating
element and thermostat
1
Remove the cylinder cover and air filter. Loosen
the thermostat cable from the air filter holder
as well as from the cabling in the front handle.
Loosen the two screws holding the thermostat's
attachment bar and remove the thermostat. See
Figure 15.
2
Loosen the pressure hose A, the return hose B and
the tank bleeding hose C. See Figure 16.
3
Loosen screws F and unhook the rubber mounting
G on both sides of the air filter holder. See Figure
17.
4
Loosen the cable to the carburettor's heating
element. See Figure 18.
50
- English
Fig 15
Fig 16
Fig 17
Fig 18