Avaya P333T-PWR Quick Start Manual page 7

Setting the Parameters
If you wish to change the default parameters shown and configure the mandatory
parameters, we recommend that you use the Command Line Interface (CLI).
For further information, please refer to the Avaya P333T-PWR User's Guide.
Default Switch Settings
Parameter
Avaya P330 IP Address
BootP Mode
Default Gateway
Management PC SLIP IP Address
VLAN Management ID
Spanning Tree
TFTP Mode
TFTP Server
TFTP File Name
Default Port Settings
Parameter
Duplex mode
Port speed (Mbps)
Flow control
Backpressure
Auto-negotiation
Administration status
Port VLAN ID
Tagging Mode
Port Priority
Inline Power
Inline Power Priority
149.49.32.134
Never
0.0.0.0
192.168.10.2
1
Enabled
Limited
0.0.0.0
viisa
10/100Base-TX Ports
Full duplex
100
Off
On (only in Half duplex)
Enabled
Enabled
Low
Default Setting
Default Setting
100Base-F Ports
Full duplex
10
Off
Not Applicable
Not Applicable
Enabled
1
Clear
Regular
Not Applicable
Not Applicable
1000Base-X Ports
Full duplex only
1000
Off
Enabled
5