Avaya P333T-PWR Quick Start Manual page 4
Hide thumbs
Also See for P333T-PWR:
- Quick start for hardware installation (34 pages) ,
- Installation and configuration manual (122 pages) ,
- Recommended redundancy scheme (8 pages)
Advertisement
Power up
AC Input
1.
Insert the power cord into the power connector (BUPS or Power Supply) on the rear of the
unit.
BUPS connector
AC connector
2.
Insert the other end of the power cord into the electricity supply or the connector on the
BUPS.
The unit powers up and performs a self test procedure. The LEDs flash at regular
intervals after the self-test procedure is completed successfully.
3
DC Input (Optional)
The P333T-PWR an operate on the AC input only. However, you may wish to use the optional
DC input for the following:
•
Backup for the Power over Ethernet ports
•
To provide more than 200W for the Power over Ethernet ports
Please refer to the P333T-PWR User's Guide for more information.
DC connector
Advertisement
