Table of Contents
Advertisement
Never restrict the incoming or outgoing airflow of the workstation by blocking any vents or air intakes,
●
as shown in the following figure.
Setup procedures
WARNING!
• Plug the power cord into an AC outlet that is easily accessible.
• Disconnect power from the workstation by unplugging the power cord from the AC outlet (not by unplugging
the power cord from the workstation).
• Plug the cord into a grounded (earthed) three-pin outlet. Do not disable the power cord grounding pin (for
example, by attaching a two-pin adapter). The grounding pin is an important safety feature.
To set up the workstation:
1.
Connect the power cord ❶ to the workstation.
2.
Connect the mouse and keyboard ❷ to the workstation.
3.
Connect the monitor ❸ to the workstation.
4.
Connect other peripheral components (such as a printer) according to the instructions included with the
device.
5.
Connect a network cable to the workstation and to a network router or LAN device.
6.
Plug the workstation power cord and monitor power cord ❹ into an AC outlet (4).
To reduce the risk of electric shock or damage to your equipment, observe these practices:
Setup procedures
9
Advertisement
Table of Contents
Troubleshooting
